Product Description
Model Type: YCQ-2L-2
Maximum Capacity: 2L
Suitable for Blowing Bottles: 200ml to 2L
Type: Automatic Bottle Blow Moulding Machine
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.3percent.
Product specification
|
item |
YCQ-2L-2 |
Bottle type specification
|
cavity |
2 |
output(PCS/HR) |
2400-2700 |
Max. volume (L) |
2L |
Bottle mouth maximum overall diameter (mm) |
28-38mm |
Bottle biggest diameter |
100mm |
Bottle maximum height |
330mm |
Power specifications
|
Light tube quantity |
32pcs |
Light tube power |
1.25kw |
Maximum heating power |
40kw |
All electric machine installation |
43kw |
Actual consumption |
21.5kw |
Air pressure specification
|
Work pressure |
7-9kg/cm2 |
Low-pressure gas consumption |
1600Ltr/min |
Blow bottle pressure |
25-35kg/cm2 |
Higher -pressure gas consumption |
3000 Ltr/min |
Frozen water specification
|
Work pressure |
5-6 kg/cm2 |
Temperature range |
10 |
Consumption |
8000kcal/hr |
Frozen water flow |
88Ltr/min |
Machine specification |
Size of the machine |
2.5x1.6x1.9 (m) |
Weight of the machine |
2.5ton |
Our Advantages
1.Special design, high rigid compound die structure
2. Wide adaptability, suitable for every type mould thickness
3. Adjust convenience
4. No mould rolling out
5. More energy conservation, no need much air supply
6. High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke, quick action
8. All ZG45 casting, with long timing process, very small transformation, can meet your precise request 100%
9. Hig dead-weigh, ensure the steady during the opeartion
After Sales Service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory to install the machine ,and give you the operating manual ,and train your employee until they can operate the machine well.
3.we provide one year warranty with spare parts free.
The sample service
1.we can send you the video of the running machine.
2.you are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
Customized service
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
Company Profile
Eceng Machinery is a diversified conglomerate with a history of 17 years. Our company was founded in 2007 and is committed to providing a One-Stop Solution for All PET Packaging Needs.
Up to now, we have developed into a one-stop service provider that aggregates three factories. We have a blow molding machine factory, a packaging machine factory, and a mold factory. We provide turnkey projects for your bottled water/beverage juice/daily chemical packaging/carbonated beverage production lines and oil filling production lines.
![Auto Bottle Blowing Machine](//www.micstatic.com/athena/img/transparent.png)
Packaging & Shipping
![Auto Bottle Blowing Machine](//www.micstatic.com/athena/img/transparent.png)
Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!welcome to you visit our factory!!!