Bottle plastic machine
MODELS: Q6000
Description
It is can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle products
1-Can be connected with filling machine directly. Saving the investment on the ordering-bottle machine.
2-Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
3-Sole heating electricity saving design.50% electricity saving comparing to the other machine.
4-Specially mould locking clamping system, 1.5 times efficiency.
5- Easy installation and starting
6- Low rejection rate: Less than 0.3percent.
Machine Parts
Blowing Cylinder ----Festo (Germany)
Moulding Closing and Opening Cylinder ---- Festo (Germany)
Value ---- Festo (Germany)
Revolve Cylinder ---- SMC (Japan)
PLC ---- Mitsubishi (Japan)
Touch Screen ----Hitech (Taiwan)
Switch ----Omron (Japan)
| Item |
Q6000 |
| Bottle type specification |
Cavity |
4 |
| output |
5500-6000 |
| Max.volume |
2L |
| Bottle mouth maximum overall diameter |
28-38mm |
| Bottle biggest diameter |
100mm |
| Bottle maximum height |
330mm |
| Power specifications |
Light tube quantity |
32pcs |
| Light tube power |
1.5KW |
| Maximum heating power |
48KW |
| All electric machine installation |
51KW |
| Actual consumption |
35.7KW |
| Air pressure specification |
Work pressure |
7-9kg/cm2 |
| Low-pressure gas consumption |
1600L/min |
| Blow bottle pressure |
25-35kg/cm2 |
| Higher -pressure gas consumption |
4800Ltr/min |
| Forzen water specification |
Work pressure |
5-6 kg/cm2 |
| Temperature range |
10 |
| Consumption |
12000kcal/hr |
| Forzen water flow |
88L/min |
| Machine specification |
Size of the machine |
4.5*2.0*2.3 |
| Weight of the machine |
4.5ton |
Technology Advantage
l. Special design,high rigid compound die structure
2. Wide adaptability, suitable for every type mould thickness
3. Adjust convenience
4. No mould rolling out
5. More energy conservation,no need much air supply
6. High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke,quick action
8. All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
9. Hig dead-weigh, ensure the steady during the opeartion
After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory to install the machine ,and give you the operating manual ,and train your employee until they can operate the machine well.
3.we provide one year warranty with spare parts free.
The sample service
1.we can send you the video of the running machine.
2.you are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
Customized service
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
well-known for its fine quality for plastic bottle blowing machine
After sales service
1> Find our products through ecengmachinery.en.made-in-china.com Alibaba,GlobalMarket,Made in China,Globalsources,Tradekey.
2>After one year , we can help you to maintain the machine and the accessories are provided only one the cost price.
3>Every 3 year , we can help to overhaul the machine freely(labor).
4>Free production technology and process configuration.
5> We can help you to design the product line , workshop and provide turn-key project.
6>Installation: Experts' team to buyer's country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $60/day during the engineer's journey.
7>Warranty: One year from the date from the date of Installation or acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part .
[1] Q: Are you a factory or trading company?
A: We are a factory.
[2] Q: Where is your factory located?
A: Our factory,near Shanghai & Ningbo port, is located in Zhangjiagang,Jiangsu.
[3] Q: How about quality control in your factory?
A: " Quality is the key point, do what customers need"
Eceng machinery factory focuses on quality,quality control from beginning to the end. Every piece of goods is tested strictly before packing and delivery.
[4] Q: How about guarantee ?
A: One year guarantee.
[5] Q: Do you provide bottle blow mould and air compresor ?
A: Yes , we provide complete system and you will no need to find the suitable air compressor and chiller...etc..
[6] Q: What is the language of the PLC and touch panel?
A: Don't worry, we will translate the language in English,Spanish or any other language, to make sure you will have an easy operation .
Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Products:
PVC/HDPE/PP-R pipe extrusion line, PVC & WPC profile extruding line and plastic sheet production lines with the relative auxiliary machine, PE film/ PET bottles recycling line and pelletizing lines.
Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!
welcome to you visit our factory!!!
Audited Supplier 
){kind=link}
){kind=link}