Product Description
Single stage stretch blow moulding machine
Model type: YCQ-2L-2
Product max volume: 2L
Suitable for blowing bottles between 150ml to 2000ml
Necessary auxiliary devices: High pressure air compressor, High pressure air filter, Low pressure air compresor, low pressure air filter, Chiller, Cold Dryer
Automatic PET Bottle Blow Moulding Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product.
Detailed Photos
PET Bottle Blow moulding machine YCQ-2L-2
Technology Advantage
Machine Featuers of PET Bottle Blow moulding machine
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: Less than 0.2 percent.
Product Parameters
| Item |
YCQ-2L-2 |
| Bottle type specification |
Cavity |
2 |
| Theory output |
2400-2700 |
| Max.volume |
2L |
| Bottle mouth maximum overall diameter |
80mm |
| Bottle biggest diameter |
100mm |
| Bottle maximum height |
330mm |
| Power specifications |
Light tube quantity |
32pcs |
| Light tube power |
0.75KW |
| Maximum heating power |
24KW |
| All electric machine installation |
27KW |
| Actual consumption |
8.1KW |
| Air pressure specification |
Work pressure |
7-9kg/cm2 |
| Low-pressure gas consumption |
1000L/min |
| Blow bottle pressure |
25-35kg/cm2 |
| Higher -pressure gas consumption |
1500Ltr/min |
| Forzen water specification |
Work pressure |
5-6 kg/cm2 |
| Temperature range |
10 |
| Consumption |
5000kcal/hr |
| Forzen water flow |
30L/min |
| Machine specification |
Size of the machine |
2.25x1.6x1.7 |
| Weight of the machine |
2.5ton |
FAQ
[1] Q: Are you a factory or trading company?
A: We are a factory.
[2] Q: Where is your factory located?
A: Our factory,near Shanghai & Ningbo port, is located in Zhangjiagang,Jiangsu.
[3] Q: How about quality control in your factory?
A: " Quality is the key point, do what customers need"
Eceng machinery factory focuses on quality,quality control from beginning to the end. Every piece of goods is tested strictly before packing and delivery.
[4] Q: How about guarantee ?
A: One year guarantee.
[5] Q: Do you provide bottle blow mould and air compresor ?
A: Yes , we provide complete system and you will no need to find the suitable air compressor and chiller...etc..
[6] Q: What is the language of the PLC and touch panel?
A: Don't worry, we will translate the language in English,Spanish or any other language, to make sure you will have an easy operation .
Company Profile
){kind=link}