pet bottle blowing molding machine
Products Introduction:
YCQseries is one kind of twostep automatic PET bottle blow moulding machine,which is suitable for blowing any shape of
PET bottles such as carbonated water bottles, water bottles, juice bottles, oil bottles, cosmetic containers,etc.
Characteristics:
1).The machine adopts human-computer interface to control the whole working procedures, auto loading, auto blowing, auto dropping. Action cylinders are all assembled with magnetic induction switches.
Connect with PLC to control every step and test every cylinder. Next action will continue after the former step done,
If former step is not finished, alarm automatically and do not work. PLC displays problem position.
2).Fast speed, accurate position, smooth action.
3).According to special demand, adopt cross double crank pressed clamping, with strong clamping force.
Mould open stroke can be adjustable according to the bottle size to save the time.
4).Far infrared heater lamps have strong penetrations , preforms are heated uniformly while rotating,
PLC or electronic pressure adjustor controls each group of temperature separately.
5).Particular preheater design makes preform close while heating. Change space, shorten heating tunnel and reduce energy consumption according to the bottle size while blowing.
6).The air supply system consists of slight blow, high pressure blow, low pressure actions, to supply enou gh air for different products.
7).Special recycling installation for high pressure air reduce the energy consumption.
8).Operation consists of manual and automatic procedure, manual operation for assembly and test, autom atic operation for production.
9).Production workmanship process is fully automatic to make best quality and pollutionfree. it holds less i nvestment, high efficiency, easy operation, simple repair, safety etc.
Warranty:
We response for one year warranty for the machine, however, it without any human conduct. And provideone-year free spare part for client.
Up 15 million shots for the bottle mould.
3 million shots for the perform mould, cap mould.
All moulds are designed by CAD/CAM.
We also can provide the drawing for the mould, help you to maintain the mould, and machine.
Delivery time:30 working days if no stock.
Payment: 30% T/T as advance payment and the balance should be paid before shipment after inspected by customer.
| |
item |
YCQ-20L-1E |
Bottle type specification
|
cavity |
1 |
| output (PCS/HR) |
1350 |
| Max. volume (L) |
20L |
| Bottle mouth maximum overall diameter (mm) |
150mm |
| Bottle biggest diameter |
240mm |
| Bottle maximum height |
450mm |
Power specifications
|
Light tube quantity |
48pcs |
| Light tube power |
1.5kw |
| Maximum heating power |
72kw |
| All electric machine installation |
75kw |
| Actual consumption |
52.5kw |
Air pressure specification
|
Work pressure |
7-9kg/cm2 |
| Low-pressure gas consumption |
1600Ltr/min |
| Blow bottle pressure |
25-35kg/cm2 |
| Higher -pressure gas consumption |
2000-3000 Ltr/min |
Frozen water specification
|
Work pressure |
5-6 kg/cm2 |
| Temperature range |
10ºC |
| Consumption |
8800kcal/hr |
| Frozen water flow |
88Ltr/min |
| Machine specification |
Size of the machine |
5.2*2.0*2.0 (m) |
| Weight of the machine |
6ton |
1.Q:Are you a factory or trading company?
A:We are a factory
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in Taizhou City, Zhejiang Province, China, about 3 hours train from Shanghai by fast train. All our clients, from home or abroad, are warmly welcome to visit us!
3.Q:What is the payment of your machines ?
A:30% by T/T as down payment, 70% by T/T or L/C before shipment
4.Q:What is the delivery of your machines ?
A:30 days after down payment and drawing comfirmed
5.Q:How does your factory do regarding quality control?
A:Quality is priority. ZS People always attach great importance to quality controlling from the beginning to the end.
6.Q:How about after sales service?
A:One year spare parts for easy broken parts, long term technical support, as customer demand, sending technicians to custoemr site for instatllion or trainning. at importance to quality controlling from the beginning to the end.
Technology Advantage
l. Special design,high rigid compound die structure
2. Wide adaptability, suitable for every type mould thickness
3. Adjust convenience
4. No mould rolling out
5. More energy conservation,no need much air supply
6. High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke,quick action
8. All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
9. Hig dead-weigh, ensure the steady during the opeartion
Our Service
After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory to install the machine ,and give you the operating manual ,and train your employee until they can operate the machine well.
3.we provide one year warranty with spare parts free.
The sample service
1.we can send you the video of the running machine.
2.you are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
Customized service
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
well-known for its fine quality for plastic bottle blowing machine
After sales service
1> Find our products through ecengmachinery.en.made-in-china.com ******,GlobalMarket,Made in China,Globalsources,Tradekey.
2>After one year , we can help you to maintain the machine and the accessories are provided only one the cost price.
3>Every 3 year , we can help to overhaul the machine freely(labor).
4>Free production technology and process configuration.
5> We can help you to design the product line , workshop and provide turn-key project.
6>Installation: Experts' team to buyer's country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $60/day during the engineer's journey.
7>Warranty: One year from the date from the date of Installation or acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part .
Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Products:
PVC/HDPE/PP-R pipe extrusion line, PVC & WPC profile extruding line and plastic sheet production lines with the relative auxiliary machine, PE film/ PET bottles recycling line and pelletizing lines.
Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!
welcome to you visit our factory!!!
Audited Supplier 
){kind=link}